Close
Pro Series Network Camera
  • Pro Series Network Camera

Network Camera Serie Professionale

MPEG4 + Motion-JPEG Dual Mode, CCD, PAL
Model Number: 550796
  • Sensore SONY Super HAD CCD 1/3" per immagini di qualità eccellente
  • Fino a 25 frame al secondo in tutte le risoluzioni
  • Supporta risoluzione immagine fino a 720 x 576 (D1)
  • Supporta audio, full-duplex, fino a 3.4 kHz
  • Connettore per ingresso microfono esterno
  • Connettore per uscita casse acustiche esterne
  • Terminal block per sensori esterni e periferiche di allarme esterne
  • Supporta condizioni di scarsa luminosità, minimo 0.1 lux
  • Supporta simultaneamente MPEG4 compressione dell'immagine Motion-JPG
  • Supporta MPEG4 video streaming con modalità CBR (constant bit rate) e VBR (variable bit rate)
  • Frame rate controllabile
  • Accesso video tramite qualsiasi Web browser standard
  • Supporta iniettori IEEE 802.3af Power over Ethernet, mid- ed endspans
  • HTTP Web server integrato supporta 50 connessioni di utenti simultaneamente
  • Supporta crittografia HTTPS per una maggiore sicurezza
  • E-mail integrata, FTP, DDNS e DHCP client
  • Rilevazione del movimento integrata con buffer immagine/video pre-post allarme
  • Event-triggered FTP e carico tramite e-mail di immagini e video
  • Ampio HTTP API per integrazione software e programmazione remota delle operazioni
  • Include IP Installer su base Windows e software Multi-Viewer fino a quattro camere
  • Garanzia a vita
    Standard
  • IEEE 802.3 (10Base-T Ethernet)
  • IEEE 802.3u (100Base-TX Fast Ethernet)
  • IEEE 802.3af (Power over Ethernet)

    Informazioni generali
  • 32-bit ARM9 RISC CPU
  • 16 MByte video frame buffer
  • 16 MByte video frame buffer
  • 32 Mbyte SDRAM
  • Supporta risoluzioni immagine: D1 (720 x 576), CIF (352 x 288)
  • Supporta audio
    - Full duplex
    - Larghezza di banda: 300 Hz to 3.4 kHz
    - Ingresso audio: 3.5 mm / 1.8" connettore per ingresso microfono
    - Uscita audio: 3.5 mm / 1.8" connettore uscita casse acustiche
  • Protocolli supportati: TCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP, RTSP, RTC
  • Certificazioni: FCC Class B, RF: EN300328, EMC: EN301489-1/-7, Safety: EN60950-1

    Sensore immagine e specifiche delle lenti
  • Sensore Super HAD CCD 1/3" SONY
  • S/N ratio: > 48 dB
  • Uscita video: 1.0 Vp-p (75 Ohms, composito)
  • Controllo automatico del bilanciamento
  • Controllo dell'immagine, luminosità, contrasto, saturazione, colore
  • 0.1 minimum lux
  • Otturatore elettronico: 1/50 - 1/10.000 sec.
  • Lenti standard sostituibili montaggio CS 1/3"
  • Lunghezza di fuoco 6.0 mm, visione grandangolare di 54˚, distanza obbiettivo 0.1 m a infinito
  • Massima apertura relativa F1.8

    LED
  • Alimentazione
  • Collegamento alla rete
  • Camera operativa

    Informazioni fisiche
  • Dimensioni: 87 (W) x 158 (L) x 45 (H) mm (3.4 x 6.2 x 1.8 in.)
  • Peso: 1.1 kg (2.34 lbs.)
  • Temperatura d'esercizio: 0 – 50°C (32 – 122°F)
  • Umidità d'esercizio: 10 – 95% RH, senza condensa
  • Temperatura di stoccaggio: 0 – 60°C (0 – 149°F)

    Alimentazione
  • Alimentatore esterno: 12 V DC, 1.5 A
  • Consumo di corrente: 3.0 Watts (massimo)

    Sistemi richiesti
  • Windows 2000, XP, Linux, Mac OS X
  • Computer con connessione di rete
  • Web browser supportato:
    - MS Internet Explorer 5.0 o superiore (ActiveX + Java)
    - Mozilla 1.x, Mozilla Firefox (Java)
    - Netscape Navigator 6.0 o superiore (Java)
    - Opera (Java)
    - Safari (Java)
    - Konqueror (Java)

    Contenuto della confezione
  • Network Camera Pro Series
  • Manuale d'istruzione
  • Alimentatore esterno
  • CD con il software
... see more
 
Datasheet
Specyfikacja PDF (Polski) Download
Datasheet (English) Download
Datenblatt (Deutsch) Download
 
Firmware
V. 4.80 Download

Changes 4.78 -> 4.80:

  • Added custom SMTP port option. Default port 25 can now be changed
  • Fixed problem related to DHCP causing the camera to reboot
  • Motion detection now available in QVGA mode
  • Fixed PLAIN authentication method for SMTP
  • Several fixed concerning motion detection addressed

Changes 4.74 -> 4.78:

  • Added frame rate parameter to image.cgi command for mode = http
    Example - Frame rate = 1
    http://camera_IP/image.cgi?id=guest&passwd=guest&mode=http&fr=1

    Example - Frame rate = 10
    http://camera_IP/image.cgi?id=guest&passwd=guest&mode=http&fr=10

  • Change behavior: The global frame rate parameter in the camera's image settings is no longer being ignored when
    using the image.cgi command in http mode (see 1.) This means, that if the global frame rate is set to "5", the M-JPEG stream will only stream at 5 fps max.
  • Added a new CGI command to query the alert state of the internal event trigger.
    Syntax:
    http://camera_IP/alert_state.cgi?id=admin&passwd=admin
    Returns:

    motion=timestamp
    periodic=timestamp
    sensor=timestamp

    timestamp format = yyyymmddhhmmss


Changes 4.51 -> 4.74:

  • Added HTTPS / SSL encryption support
  • Fixed incompatibility problem with certain SMTP servers
  • Fixed Motion-JPEG streaming problem which could lead to interruptions of the video stream
  • Removed user based frame rate control to increase overall performance of the camera
  • Fixed bug concerning the NTP Server (when adding an SMTP server, the camera time would jump forward by 30 mins).

Changes 4.2 -> 4.51:

  • Resolved remote viewing problem concerning NAT
    and MS Internet Explorer ActiveX access
  • HTTP API: Added a new varibale to return the camera configuration
    as an XML formatted document
    http://camera_address/inquiry.cgi?id=admin&passwd=admin&inq=xm
  • Fixed and cleaned up existing HTTP inquiry.cgi commands
  • Fixed Digital I/O connector function in Event Trigger Configuration

NOTE:
1. The camera loses all settings but its IP Address during the firmware update. You need to re-configure the settings after the update is completed.

2. The new firmware demands that an updated ActiveX control (mwviewer.ocx) be installed on systems accessing the camera via MSIE/ActiveX. Administrator rights on the computer are required to do the installation (automatic installation after MSIE web browser connects to camera).


Installation instructions:
1. Download and uncompress the file CCD_wired_4.80.zip
2. Start the upgrade utility upgrade_1010.exe.
3. Refer to the included readme file for more information.

 
Manual
Camera User Manual (ENG) Download
Camera User Manual (POL) Download
JPG/Motion-JPEG Access Reference (ENG) Download
Multiviewer Instruction Guide (ENG) Download
Camera User Manual (ITA) Download
Camera User Manual (Turkish) Download
HTTP API 1.05 Reference Document Download
 
Software
IP Installer 2.04 Download
Windows MultiViewer Application Download
ETSP Client Download
Event Triggered Saving Program
Upgrade Utility Download
 

Find a Dealer

Select one:

 
Recently viewed products