The Intellinet Network Solutions 8-Port PoE Web-Managed Desktop Gigabit Switch (560542) is designed to pass both data and electrical power to a number of PoE compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports (all of which support 802.3at/af PoE/PoE+), this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.
Power over Ethernet 802.3at The Intellinet PoE Web-Managed Desktop Gigabit Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 Watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimizing the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet PoE/PoE+ Splitter.
Web-Management This PoE switch is equipped with an impressive array of advanced management functions that allow you to be in full control over your network. The 8-Port PoE Web-Managed Desktop Gigabit Switch supports VLAN, port aggregation, QoS and port mirroring, comes with an integrated ICMP ping and cable testing tool, and support SNMP V1 and the popular V2c - just to name a few.
* Total PoE budget for this switch is 123 watts. Per-port average power distribution is 15 Watts; maximum per-port power usage cannot exceed 30 Watts.
Provides power and data connection for up to eight PoE network devices
Save time and money by delivering data and power via existing network cables
Configuration Options: - Port link speed: 10 Mbps, 100 Mbps, 1000 Mbps or auto-negotiation - PoE on/off per port - Flow control on/off per port - VLAN - Port Mirroring - Port Aggregation/LACP: 4 groups with up to 8 member ports per trunk - Broadcast Storm configuration with broadcast rate, multicast rate, and flooded unicast rate - IGMP Snooping - Quality of Service (QoS): 802.1p or DSCP - Integrated VeriPHY cable diagnostics tool - Integrated ICMP Ping client sends ping requests to other network nodes - SNMPv1/v2c (Simple Network Management Protocol) - LAN settings (IP address, DHCP, Gateway, etc.)
Monitoring Options: - Traffic statistics - LACP status - RSTP status - IGMP status
Certifications: FCC Class A, CE
Input: 100 – 240 V AC, 50 – 60 Hz
Power consumption: 130 Watts (maximum)
Dimensions: 266 (W) x 160 (L) x 44 (H) mm (10.5 x 6.3 x 1.7 in.)