The INTELLINET NETWORK SOLUTIONS Wireless 150N Broadband Router is the latest in wireless networking. Taking advantage of new technology, a wireless network can now see greatly enhanced network speeds.
Multiple Solutions in One Device The INTELLINET NETWORK SOLUTIONS Wireless 150N Broadband Router serves multiple purposes — an access point for your wireless network, a 4-port router for hard-wiring Ethernet devices — and brings it all together so that the devices can access a high-speed Internet connection.
Up to 150 Mbps network link speed
Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE 802.11g/b standards
Supports WMM function to meet the multimedia data bandwidth requirement
Supports Wi-Fi Protected Setup (WPS)
Supports WEP and WPA/WPA2 (TKIP and AES) data encryption
Integrated 10/100 Mbps LAN switch with Auto MDI/MDI-X support
Easy Internet setup through WAN connection wizard
DHCP server assigns IP addresses for all LAN users
DHCP server supports static lease management
Supports virtual server, port forwarding and DMZ (demilitarized zone)
Supports DDNS (dynamic DNS)
Supports UPNP (Universal Plug and Play)
Integrated anti-DOS firewall
QoS (Quality of Service) bandwidth management
VPN Pass Through (PPTP, IPSec, L2TP)
Use INTELLINET NETWORK SOLUTIONS Wireless N adapters for the best compatibility and performance
Easy installation through Web-based user interface
System status
Security log
Firmware upgradeable
Three-Year Warranty
Standards
IEEE 802.1d (Spanning Tree Protocol)
IEEE 802.11b (11 Mbps Wireless LAN)
IEEE 802.11g (54 Mbps Wireless LAN)
IEEE 802.11n (150 Mbps Wireless LAN)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
General
LAN ports: 4 RJ45 10/100 Mbps data ports
LAN ports with Auto MDI/MDI-X
WAN port: 10/100 Mbps RJ45 connector
LAN to WAN throughput: 93 Mbps
Flash: 2 MB
Memory: 16 MB SDRAM
Certifications: FCC Class B, CE, RoHS
Router
Supported WAN connection types: - Dynamic IP (DHCP for cable service) - Static IP - PPPoE (for DSL) - PPTP
Release Date: November 2010. For Ralink-based product (12V power supply, runtime code 1.03, 1.04, 1.07 or 1.11) only. Firmware is not designed for devices with a 5V power supply.